THE BEAST IS BACK

The Savage started the RC Bashing movement and 2 decades later, we're still here, stronger than ever and thrilled to land right back into the ring with the holy grail, the jewel in the crown... Ladies and gentlemen, the Savage XL FLUX is back!

ALL-NEW WHEELS & TIRES

A new Savage XL FLUX deserves a new set of brutally agressive HPI Havok 3.8" wheels, wrapped in yet another addition to the TREDZ "by HPI Racing" Tire rack. The Tredz Terrahex 3.8" Tires are designed tough, but for ultimate agility and handling at ground shaking speeds

From the Center Differential and Super HD Drivetrain, to the Bulletproof 29/9T Differentials and 17mm axles and hex hubs, to the new Rugged Bumpers, every inch of the Savage XL FLUX V2 is built to survive and dominate. With beefy suspension arms, ready to take the punishment of big-air drops while everything within is protected by the reinforced Xtra-long wheelbase thick aluminum TVP (Twin Vertical Plate) chassis and Xtra-long center skidplate, flanked by sturdy, new streamlined battery boxes.

NOT FOR THE FAINT OF HEART!

Like all HPI trucks, the Savage XL FLUX V2 is easy to drive with the included steering wheel controller - but it should be handled with extreme caution! Hit the gas and the 6S FLUX system blasts into action and to the uninitiated things can get pretty crazy VERY quickly! Expect insane standing big air stunts, while mud, rocks and dirt get slung at you when you pull the trigger!

Once you get used to the power of the FLUX 2200Kv motor, you'll be able to rip off huge stunts at your local skate park, achieve crazy fast top speeds in empty parking lots and throw up huge rooster tails of dirt! The power of the Savage XL FLUX V2 cannot be denied! 

BIGGER - LONGER - WIDER - BETTER!

One look at the new Savage XL FLUX V2 and you know it means business! The all-new 4-door GTXL-6 'kingcab' style pick-up body fits over the XL-long 3mm thick TVP chassis which makes the truck nearly 600mm long in total! The Savage XL FLUX V2 isn’t simply extended at the back like its predecessors, the totally NEW XL chassis layout extends at both the front and rear of the car for perfect driving balance and agility! For awesome stability, XL-wide 17mm axle extenders gives the truck a total width of nearly 470mm for maximum ground-stomping traction!

NEW LOW CENTER OF GRAVITY CHASSIS DESIGN & LAYOUT

HPI's designers approached this Next Level Savage XL FLUX V2 from the ground up with a view to maximising performance and above the new wheels and tires, housed in all-new long-wheelbase TVP aluminum chassis with XL length center skid plate is a new, efficient, streamlined layout - fully optimized for the RC bash of your life!

HD SPRING-LOADED SERVO SAVER

Continuing the Savage's reinforcements, we're using even more HD upgrades in the standard spec! This heavy-duty servo saver spring provides more direct steering for all the new Savage X and XL Nitro and Flux models, allowing today's stronger steering servos to give the Savage faster and more immediate steering response.

TOUGH SAVAGE SUSPENSION

After almost 2 decades of seriously thrilling RC bashing performance, the HPI Savage has earned a reputation for being the toughest monster truck you can find. The Savage suspension has evolved along the way as well. The New Savage XL FLUX V2 features the latest ultra-tough, super-thick webbed suspension arms and uprights that can take a barrage of abuse and punishment, giving you plenty of big-air thrills in their stride.

CENTER SKID PLATE

Another new addition to the Savage XL FLUX is a super tough center skid plate specified by HPI’s designers to protect the chassis underside and the all-important components housed within. Whilst helping to absorb shocks and protect from impact and strikes from dirt, rocks, stones and debris, it also looks great too!

NEW CAPTURED HINGE PINS

It's not just about ballistic action, the new generation of Savages also have usability high on their agenda...  Over the years Savage fans around the world have told us the hinge pins need to be secured in place so they don't come loose during extreme bashing, well our designers are always listening and have fitted the car with hinge pin covers to ensure they don't go anywhere, no matter how hard you bash

17MM HEX HUBS

For the new generation of Savages we've introduced Standardized 17mm Aluminum Hex Hubs. This means your Savage XL FLUX truck is ready to use any of the gigantic range of 1/8th scale buggy and truggy wheels and tires available from HPI. A large, black, serrated 17mm nut holds the wheel securely to the hub for worry-free bashing duties. 

LEGENDARY ALUMINUM TWIN VERTICAL PLATE CHASSIS

The beefy metal plates that house all the good stuff under the hood are synonymous with the Savage family. The 3mm thick "TVP" as we call them - are unshakeably strong, yet lightweight and provide the ultimate backbone built to handle gigantic jumps, rough landings, rolls and full-speed crashes.

BRAND NEW RUGGED BUMPERS FRONT AND REAR!

With a chunkier, more aggressive than ever look, the new front and rear bumpers also have space for both 5mm and 3mm LEDs so you can add your choice of lights and light up the track while you bash

MOLDED BODY COMPONENTS

Our best-ever generation of Savage upgrades are not just limited to performance, the brand new HPI designed GTXL-6 Kingcab body also looks awesome with a new livery and plastic molded body detail parts including realistic grille, vents, mirrors and roll bars

FAST ACCESS MOTOR MOUNT

The Savage is known to wreak havoc and destruction, devouring terrain and anything in its path. However the Savage needn't be brutal for you to work on! We're continuing to refine the layout and accessibility in several areas like this new 2-piece motor mount design which allows you access via just the top screws. So removing the motor is no longer a time consuming project!

HIGH-POWER FLUX ELECTRONICS

The colossally powerful FLUX MLH-2200KV motor is ready for all the power you can run through it, and the FLUX ELH-6S-capable electronic speed controller is fully capable of up to 22.2 volts of power to let you pull off giant stunts and jaw-dropping speed!!

Power your Savage XL FLUX V2 with a pair of matching LiPo batteries equipped with 2S 7.4v or a whopping 3S 11.1v totalling 6S insane power!

Check out our recommended batteries, chargers and all important LiPo pouch at the foot of this page.

ENCLOSED ELECTRONICS BOX 

Keeping your precious electronics safe is a veritable fortress! Building on the aluminum vertical chassis plates is a rugged, enclosed electronics box and Hex encrusted cockpit allowing airflow to hit the ELH-6S Electronic speed controller and access to the all important power button - to start the fun!!

FAST ACCESS BATTERY DOORS

Continuing the theme of fast access and easy operation are the new thumb latches we've included with the streamlined, redesigned battery boxes, making it easier than ever to insert fresh power and keep the action coming!

BIG BORE NYLON SHOCKS 

Four huge XL-size Big Bore shocks give all the suspension action you need to get out and blast through the roughest of tracks or off-road terrain. With slick nylon bodies they are lightweight and strong, with almost no friction 'stiction' between the shock piston and shock body. The extra-large capacity gives you extra control and damping action so you have the driving feel that makes off-road driving so much fun!

ALL-METAL TRANSMISSION GEARS

In addition to steel pinion and spur gears, the Savage XL FLUX V2 features all-metal transmission gears to make sure that power delivery is uninterrupted and every bit of power gets from the motor to the tires efficiently and with no worry of damage to the gears. The whole drivetrain runs on ball bearings for optimal efficiency, for extra-long runtimes and mega-fast top speeds!

STEEL SPUR GEAR & SLIPPER CLUTCH

The drivetrain is equipped with a strong steel pinion and 43-tooth steel spur gear for extreme durability as you rip off huge stunts and jumps. For extra resilience, the spur gear features a dual slipper pad design. The spur gear is sandwiched between two lightweight aluminum slipper plates so the drivetrain is protected from hard landings.

FAST ACCESS CENTER DIFF

As all true RC fans know, the hobby is not just about bashing, it's also about maintenance, repairs, spares and upgrades! As we take a look at the new Savage XL FLUX V2 Center Differential, it's good to know that the inner workings of the beast are now easily accessible via just a few screws. So whether you want to check it over, or change the diff grease for extra tuning, it'll be quick and easy so you can get back to bashing in no time!

SUPER HD DRIVETRAIN

To cope with the sheer power of the 2200KV FLUX system and the brutal eruption of energy it inflicts upon the Savage XL FLUX, the Super HD drivetrain is in its element. From the all-metal center transmission to the Bulletproof 29/9T Differentials. The diffs are fitted with extra-tough forged metal heavy-duty differential pinion and ring gears, plus sintered metal 4-gear internals and metal casings at both ends. Steel diff outdrives, extra-thick super heavy-duty dogbones and steel axles finish off the drivetrain.

STUNT READY OUT THE BOX

The Savage XL FLUX V2 lives and breathes for big air, and it's able to crank out multiple backflips and wicked wheelies at a blip of the throttle to give you maximum freeestyle points and stunt-whipping action! The included Center Diff gives the XL FLUX V2 smooth handling, sublime control and power efficiency!  

• NEW! XL Standardized 17mm Aluminum Hex Hubs
• NEW! XL LCG Chassis Design & Layout
• NEW! XL Center Skid Plate
• NEW! Tredz Terrahex 3.8" Tires
• NEW! 3.8" Havok Wheels
• NEW! Pre-Cut Factory Finished And Decaled GTXL-6 Kingcab Bodyshell
• NEW! Plastic molded body detail parts
• NEW! Rugged Modern Styled Bumpers
• NEW! Captured Hinge Pins
• NEW! All hex hardware
• NEW! Twin Clamp Motor Mount
• NEW! Twin Battery Boxes
• NEW! Center Differential
• 4WD Shaft Driven Monster Truck
• Independent Double Wishbone Suspension
• Oil Filled Adjustable Coilover Shocks
• Bulletproof 29/9T Differentials
• ELH-6S 150A ESC & MLH-2200KV Brushless Motor
• 43T Steel Spur Gear - Twin Slipper Clutch

#160103 Savage XL FLUX V2
1/8th 4WD Brushless Monster Truck

Specifications:
Length: 585mm
Width: 470mm
Height: 250mm
Wheelbase: 395mm


What you need:
4 AA batteries for transmitter:
HPI Recommends #101939 Plazma AA batteries

2 matching LiPo batteries with T-Plug:
and at least 4000mAh capacity and 40C discharge

HPI recommend #160161 2S LiPo or #160163 3S LiPo Plazma packs

Battery charger for LiPo battery:
HPI Recommends Reactor 200 – #118049 (US), #118050 (UK), #118051 (EU)
Reactor 600 - #160236 (US), #160237 (UK), #160238 (EU), #160239 (AUS)